Native Instruments 22320 Bedienungsanleitung

Manual

12.2 Environmental Specifications ... 16813 Appendi

6.4.4 Jog Wheels A jog wheel on your S2.Functionally speaking, the two jog wheels are quite similar to the encoders described above:they ha

6.4.5 Faders A fader on your S2.Faders are linear control elements with limited range. All of them set absolute values, with thepossible exception of

6.4.7 Switches A switch.Switches are only available on the rear panel. They control a few basic options needed whensetting your TRAKTOR KONTRO

7 Hardware Control Reference This chapter details the use of the individual sections on your S2 controller. Whenever youneed to know wha

7.1.2 TRAKTOR's Deck Flavors: Track Decks Vs. Remix Decks The TRAKTOR software provides you with four virtual Decks, A to D. Each of them can be

7.2 Using the Jog Wheels The jog wheel (right Deck pictured).The jog wheel has several functions, dealing with the playback of your track:▪ Tempo bend

▪ Inside an active Loop, while holding the LOOP IN or LOOP OUT button depressed, use thejog wheel to adjust the Loop In Point or Loop Out Point, respe

Absolute ModeBy default, the tempo fader is in Absolute mode. In this mode, whenever you move the tempofader on your S2, its position is transmitted 1

7.4 Using the LOOP Section The Loop section.The Loop section holds all necessary controls for setting and modifying Loops in your tracks.The Loop sect

The LOOP IN and LOOP OUT buttons also act as indicator: they light up simultaneously to in-dicate that a Loop is running. If looping is activ

1 Welcome to the World of TRAKTOR KONTROL S2! On behalf of the whole Native Instruments team, we are delighted that you have chosen TRAK-TOR KONTROL S

Bear in mind that all your actions affect a Floating Loop (and not the original Stored Loop, ifany). Hence, if you plan to use the modified Loop later

7.5 Using the CUE/REMIX SLOTS Section Depending on the mode, the four CUE/REMIX SLOTS buttons in each of the CUE/REMIXSLOTS sections on t

Storing a Cue Point or a Loop into a Hotcue SlotYou can directly store the current playback position into a Hotcue slot by pressing an unlit but-ton,

The four CUE/REMIX SLOTS buttons representing the four Sample Slots of a Remix Deck in Remix Deck mode.For a quick introduction to the concept of Remi

Quick Loading a Sample from the PlaylistBy holding SHIFT and pressing an unlit CUE/REMIX SLOTS button, you load the selectedSample from t

Playback state CUE/REMIX SLOTS buttonSample stopped Press to start playback.Sample playing Press to stop playback and reset it to start position.In Lo

CUE ButtonThe CUE button functions as follows:▪ When the Deck is playing, pressing CUE skips to the Floating Cue Point and stops thepla

Pressing SHIFT + SYNC sets the Deck to tempo master — the Deck tempo then serves as tem-po reference for all other synched Decks and FX. When the Deck

7.7 Using the Mixer The Mixer, in the middle of your S2.This section describes the general handling of the Mixer on your TRAKTOR KONTROL S2.You will

Mixer OverviewThe Mixer is equipped with two main channels, each of them controlling the signal comingfrom one particular Deck: channel

▪ Text appearing elsewhere on the screen (labels of buttons, controls, text next to checkbox-es etc.) is printed in light blue. Whenever you see

When using TRAKTOR PRO, the GAIN/FILTER encoder controls the input level of the signalcoming from the corresponding Deck before it passes

►Turn each EQ knob clockwise to emphasize the corresponding frequency band, and coun-ter-clockwise to attenuate this band. At center detent position,

7.7.4 Channel Fader and Channel Level Meter The channel faders and their level meters.The channel fader controls the relevant channel’s level, before

7.7.5 Crossfader The crossfader.The crossfader controls the mix between the signal(s) assigned to its left and right side. At thecenter position, the

7.7.7 Headphones Cue Button The Headphones Cue button.The Headphones Cue button (CUE) allows you to send the channel’s signal to the cue channel— in o

The Alert indicator basically informs you that something might go wrong with your TRAK-TOR KONTROL S2 system: the indicator flashes if th

7.7.9 Browse Encoder (BROWSE) and Load Buttons (A and B) The BROWSE encoder.The Load buttons (labeled A and B).The BROWSE encoder and the LOAD buttons

The REMIX knob controls the volume of TRAKTOR's Remix Decks C and D. To activate RemixDeck mode, press one of the Mode buttons A or B below; the

7.8.1 Single Mode and Group Mode In TRAKTOR, each FX Unit can work in two different modes:▪ Group mode: Each FX Unit boards three different FX

Assigning FX Units to ChannelsThe FX Units can be assigned to any number of channels in order to process the signals com-ing from the corresponding De

The TRAKTOR 2 ManualFor in-depth information on all features provided by the TRAKTOR software, please refer to theTRAKTOR 2 Manual. It is availab

The BROWSE encoder, at the top of the Mixer.1. Hold SHIFT and turn the BROWSE encoder to scroll through the Browser Tree.2. Hold SHIFT and press t

By turning the BROWSE encoder, you scroll the Playlist that is currently selected.For more info on the Browser, the Playlists (and the Favorites), ple

7.10.2 MIDI Mode The MIDI mode allows you to use your TRAKTOR KONTROL S2 as a regular MIDI controller.In MIDI mode, the TRAKTOR KONTROL S2 will transm

8 Customizing TRAKTOR KONTROL S2 TRAKTOR KONTROL S2 is a highly customizable DJ system. Many of its features can be modi-fied so that it best suits yo

The list of available pages at the left of the Preferences window.1. To display a particular page of settings, click on the page name in the left colu

8.2 Settings and Preferences for the S2 Control Elements In this section, we will describe the available settings for the control elements sitting

The settings for your TRAKTOR KONTROL S2.In this page, settings are grouped into four sections: S2 Control Options, Restore Default, Cali-bration and

8.2.1 S2 Control Options On the TRAKTOR KONTROL S2 page of the Preferences, the S2 Control Options section allowsyou to adjust the way your TRAKTOR KO

◦ When no Loop is active, the LOOP IN button sets a Floating Cue Point, whereas theLOOP OUT button sets a Loop Out Point and activates a Float

◦ The Tempo Offset buttons have the same functionality as in Absolute mode (indicat-ing any offset between software and hardware faders, among other t

▪ Chapter ↑7, Hardware Control Reference is a collection of mini tutorials, showing you howto work with the individual areas of the controller, e.g.,

The Restore button.Clicking on this button opens a warning message window, asking you if you really want to resetTRAKTOR KONTROL S2 to its default fac

▪ Faders: for recalibrating the TEMPO and channel faders.▪ Crossfader: for recalibrating the crossfader on the Mixer.▪ Jogwheel: for recalibrating the

►To change the flavor of a lower Deck, click on the corresponding menu (C or D) and se-lect the Remix Deck flavor from the drop-down menu. Click Close

►Select Start Setup Wizard in the Help menu of the Application Menu Bar (to see this bar,Fullscreen mode must be deactivated).Or►Click the Setup Wizar

→The Setup Wizard activates the selected Deck configuration, configures the audio routingoptions accordingly and resets all other TRAKTOR settings to

9 The S2 Audio Interface and Control Panel Your TRAKTOR KONTROL S2 is equipped with a high-end 24-bit/96 kHz audio interface. Youcan adjust the audio

When converting audio information to digital and vice versa, the audio driver needs to storethe data in buffer packages (audio buffers) which

►Click on the tabs at the left to open the corresponding page of the Control Panel.9.2.2 Audio Settings Page The Audio Settings page allows you to adj

The sample rate defines how many samples are played/recorded per one second of sound.A higher sample rate results in higher audio quality; howeve

Notice there is also an input latency when working with the TRAKTOR KONTROL S2. The out-put latency value does not represent the overall latency, from

To check the compatibility with several operating systems, please have a look at: http://www.native-instruments.com/compatibilityWelcome

▪ Connection Monitor: displays client-to-driver connections and USB data errors when de-tected.▪ System Performance Test: offers the possibilit

◦ Clicking on Reset has the same effect as clicking on Start for the first time. It resetsthe testing procedure to its beginning and starts a new test

2. In the panel that opens, click Sound.3. On the Sound Effects tab, select TRAKTOR KONTROL S2 in the Play alerts and soundeffects throu

10 Troubleshooting and Help This chapter covers the most common issues. Most of what can go wrong when setting up andusing TRAKTOR KONTROL S2 should b

10.2.2 USB and Driver Issues Once your TRAKTOR KONTROL S2 is connected and turned on, wait a few seconds and give alook at the USB indicator located i

▪ The port needs to fulfill the minimum power specification for a USB 2.0 port (500 mA).On certain computers, the USB 2.0 ports do not meet the offici

10.3 Loose Jog Wheel Top Plate The flat, round, push-sensitive surface of the jog wheels on your TKS2 was designed to beeasily replace

10.5 Getting Help 10.5.1 Knowledge Base / Readme / Online Support ►Open the Service Center application and click on the Support button in the upper ri

10.5.2 Forum In the Native Instruments User Forum you can discuss product features directly with otherusers and with experts moderating t

11 Appendix A – Common Setups This appendix shows you how to connect your TRAKTOR KONTROL S2 with your other gears invarious setups.For a reference of

2 TRAKTOR KONTROL S2 Quick Overview This mini-chapter will quickly introduce you to TRAKTOR KONTROL S2’s main areas and con-cepts both on your TRA

Connect the Power Supply1. Connect the included power supply to a power outlet using the appropriate adapter foryour region.2. Connect th

We strongly recommend you to use an external power supply with your S2 via the includedpower supply unit. Although operation is also po

Turn Down All Volume Controls►Before you plug any audio cable, make sure to turn down all volume controls, both onyour S2 and on your amplification sy

Connect the Main Outputs to Your Amplification System►On the rear panel of your S2, connect the Main Output 1/2's 1/4" sockets (balanced) or

Connect your Headphones to the PHONES Socket (Front Panel)►On the front panel of your S2, plug your headphones into the Headphones socket(PHONES).Befo

Turn On Your S21. On the rear panel of your S2, engage the ON/OFF switch to switch on the device.2. Look at the top panel of your controller: after a

1. Open the Preferences window by clicking on the Preferences button in TRAKTOR’s Head-er:2. Go to Preferences > Decks Layout > Deck Flavor and

11.2 Adding a Microphone Starting from the basic setup, we add here a microphone and show you how to use it on theMIC channel of TRAKTOR KONTROL 2.Bef

12 Appendix B – Technical Information You will find here the technical specifications of your TRAKTOR KONTROL S2.12.1 Technical Specifications Jacks a

13 Appendix C – Quick References This appendix provides you with Quick Reference tables summing up the basic functionality ofeach control element o

Hardware controller and software side by side.(1) Decks: TRAKTOR KONTROL S2 provides you with two physical Decks. The Decks are theplace where tr

Control element FunctionLOOP IN button Sets a Floating Cue Point at the current playback position without stoppingthe playback. This Floating Cue Poin

Control element FunctionSYNC button Activates/deactivates synchronization to tempo master (lit when sync acti-vated).SHIFT + SYNC: sets Deck as tempo

13.2.2 Channel and Crossfader Quick Reference Control element FunctionGAIN encoder Turn: adjusts input gain level for that channel (before channel fad

13.3 FX Unit Quick Reference See section ↑7.8, Using the FX Units for more details on these control elements.Control element Single mode Group modeFX

Control element FunctionLoad buttons A/B (belowBROWSE encoder)Normal: loads selected track on the respective Deck.SHIFT: copies and pastes the content

IndexAAbsolute (prefs) [138]Absolute mode [107]Adjusting levels [38]Alert indicator [125]Aligning tracks [33]Analysis [59]Assigning FX to channels [56

CCalibration [140]Changing the size of a Loop [43]Channel [28] [92]CUE button [31] [124]fader [122]FX Assign buttons [121]HI knob [120]LOW knob [120]m

DDeactivating looping [45]Deck [88]flavor [91] [141]Default FX [55]Device Monitor (Control Panel) [148]Direct FX 1-3 (prefs) [137]Distortion [39] [41]

Group mode [128]Quick Reference [173]reference [127]Single mode [128]snapshot [58]GGAIN encoder [39]GAIN/FILTER Encoder [119]Group mode [128]adjusting

LLatency [145] [148]LEDs (prefs) [141]Level meters [39]Levelsadjusting [38]Limiter [41]LoadingSamples [48]tracks [24]Loading from your S2 [129]Loop Bu

mode (as opposed to Cue mode, where the buttons control the Cue Points in Track Deck A andB). For more information on the two modes, please refer to s

MMAIN knob (software) [41]Main level [40]MAIN OUT section [95]Main Outputs 1/2 [163]Main section [93] [123]Manual Looping (prefs) [137]Manually cueing

PPhase offset (correcting) [37]PHONES socket [97] [164]Pitch (tracks) [64]PLAY button (Deck)on Track Decks [115]Playing a track [24]Playlist [91]brows

RRear panel [94]MAIN OUT section [95]POWER section [96]Recalibrating your S2 [140]Relative (prefs) [138]Relative mode [138]Remix Deck [47]concept [91]

Skipping back to start of track [34]Snap mode [43] [53] [63]Snapshot (FX Unit) [58]Sockets [102]MIC [167]PHONES [97] [164]USB [96]Storing a Cue Point

TRAKTOR Clock [60]setting as tempo master [61]TRAKTOR mode [131]TRAKTOR DJ [66]Filters [68]Freeze Mode [81]FX [83]iOS Compatibility [66]Loop Slicer [7

3 Preparing Your Music Library Most likely, you already have a collection of music files on your computer. For those of you whocan’t wait for mixing t

The information in this document is subject to change without notice and does not represent acommitment on the part of Native Instruments GmbH.

To make use of the Track Collection, you have to populate it by importing your music files.3.2 Importing Music Folders TRAKTOR offers an easy import f

If you have stored tracks in other folders or on external storage devices, you can add thesefolders to the list of TRAKTOR Music Folde

▪ The LOAD buttons A and B below the BROWSE encoder:To browse for tracks and add them to the Decks:1. Press and hold SHIFT (no matter which one

4. Alternatively, right-click (Windows) or [Ctrl]-click (Mac OS X) on the selection and chooseImport to Collection in the contextual menu.3.3.3 Import

4 Tutorials This chapter will guide you through the most common tasks that you will encounter during yourwork with TRAKTOR KONTROL S2.The tutorials a

2. In the window that opens, click Next to confirm your S2 is connected.3. The next window asks you whether you want to use an external mixer with TRA

▪ The BROWSE encoder (in the center of the Mixer):▪ The left Deck’s LOAD button (labeled "A" below the BROWSE encoder):While looking at the

4. Once the track is highlighted, press the LOAD button A on the controller to load that trackon to Track Deck A. (Obviously, to load the track to Tra

To Each Deck Its Own ChannelThe audio playing on each Deck can be further shaped by the controls on the correspondingchannel of the Mixer. Since

►At the bottom of your S2, verify that the crossfader is moved all the way to the left:►Above, the channel fader of channel A should be raised to its

GermanyNative Instruments GmbHSchlesische Str. 29-30D-10997 BerlinGermanywww.native-instruments.de USANative Instruments North America, Inc.6725 Sunse

If you see some activity on the S2's MAIN LEVEL meters, or on TRAKTOR'S MAIN level metersin the software's Header but don’t hear any so

You can already give it a try: by slowly moving the crossfader to the right, you should hear thetrack on Deck B fade in, whereas the track on Deck A p

The SYNC button.►Press the SYNC button on the right Deck to synchronize its tempo and phase with thoseof Deck A.→The SYNC button lights up. Now the tw

Snapping Cue Points to BeatsYou don’t have to worry about dropping a Cue Point directly on a beat using TRAKTOR's Snapfunction. With Snap mode on

The Snap mode indicator and the Quantize mode indicator buttons both lit in TRAKTOR's Master panel.4.2.5Interlude: In Case the Left Track Has Rea

We will now carry out a first real track blend. Thus, turn the CUE MIX knob fully clockwiseto hear the main mix in your headphones (or put o

3. Press PLAY on the left Deck to start the playback of the new track.4. On the same Deck, make sure the SYNC button is not lit.5. On the Mixer, de

The left jog wheel on your S2 controller.1. On the left Deck, press and spin the jog wheel’s top plate to seek through the track. (Youcan also fast

Note that this can also be useful when using TRAKTOR’s Sync feature. Indeed, in somesituations, the automatic beat detection might

▪ When a signal is clipping, it is not getting louder, just worse. The loud parts (typically thebeats) are cut, which both reduces the dynamic r

Table of Contents1 Welcome to the World of TRAKTOR KONTROL S2! ...11 1.1 What Is TRAKTOR KONTROL

A GAIN/FILTER encoder sits at the top of each channel.►Adjust the channel’s GAIN/FILTER encoder so that the level displayed on the channelmeter stays

The MAIN section on your S2.The MAIN level meters in the Header of TRAKTOR show you the (left and right) overall level ofyour mix before it is ad

4.4 Looping and Cueing Now that you have learned the basic mixing tasks, we will focus on one of TRAKTOR KON-TROL S2’s great features:

→This will automatically add a loop at that position in the track.The Loop size will correspond to the number on the Loop section in TRAKTOR:The Loop

Moving a LoopYou can also quickly move the active Loop across your track by using the LOOP MOVE encod-er, at the left of the Loop section:The LOOP MOV

Deactivating LoopingIf you want to deactivate the current Loop, do the following:►To deactivate looping, push either of the LOOP MOVE or LOOP SIZE enc

►To clear a Hotcue, hold down the SHIFT button and press the corresponding CUE/REMIXSLOTS button.→You can see that the button is no longer lit.Example

4.5 Using Samples in Your Mix As previously mentioned, the TRAKTOR software provides you with four virtual Decks, eachof which can be operated in seve

The Remix Deck C with a Sample loaded in the upper Sample Cell of the first Sample Slot.Remix Decks are a great way to add Samples to your set, or cap

1. Press the A button below the REMIX knob in the middle of the Mixer. This switches the CUE/REMIX SLOTS buttons on the controller to Remix Deck mode.

4.2.6 Mixing In the Track by Using the Channel EQ and Filter ... 34 4.2.7 Doing Everything by Hand ...

▪ On your S2, the corresponding CUE/REMIX SLOTS button is now dimmed, indicating thatthe Remix Slot holds a Sample (which is not audible yet).4.5.2 Tr

The Remix Deck C with the Advanced Panel on bottom. On the lower right you can see the cursor pointing on the Play Typebutton, which switches the Samp

3. Set a Loop on Deck B, using the controls in the Loop section (as explained in chapter↑4.4, Looping and Cueing).4. Press an unlit CU

The loop is now read to play in Remix Deck D. Furthermore, provided that Snap mode andSYNC are active, the loop is in perfect sync wit

TRAKTOR has an extremely powerful effect section. By default, there are two different FXUnits in TRAKTOR, which can be assigned to

►To set the FX Unit to Group mode, go to Preferences > Effects > FX Panel Mode andchoose Group from the relevant drop-down menu.→In the TRAKTOR

4.6.3 Assigning Decks to the FX Unit and Bringing In the FX Now we need to assign this FX Unit to a Deck. To do this, we use the FX Assign buttons at

1. Hold SHIFT and press the FX Button 1 repeatedly to scroll through all available FX untilthe Gater is selected in the first slot of the FX Unit 1 in

4. On channel B, press the right FX Assign button (labeled “2”) to assign Deck B to this FXUnit as well. You can deactivate the left FX Assign button

▪ We noticed that the Gater FX was synchronized to the track it was processing (see ↑4.6,Adding FX).For all this to work, TRAKTOR needs both a

5.1.3 Using the Filters ... 68 5.1.4 Adjusti

The included demo tracks used in the tutorials were previously analyzed, therefore they alreadyhave a reliable Beatgrid. Before you can effectively

The Auto mode is activated by default, and this is the mode we used in all the previoustutorials.With AUTO activated, TRAKTOR auto

→Deck B now is the tempo master: the MASTER button on the left Deck Display in TRAK-TOR turns off, whereas that of the right Deck lights up:The Auto m

This way, all Decks will instantly follow the Clock’s tempo. You can then set the Clock’s tempoto the tempo you intend to play your set via the numeri

▪ If you want to set a Loop starting directly on a beat, activate Snap and press the LOOPSIZE encoder around the desired beat.▪ On the contrary, sho

→The tone of the track gets back to its original value, thus preserving most of its acousticfeeling. In the Deck section, the KEYLOCK indicator lights

5 Using the S2 with TRAKTOR DJ The TRAKTOR KONTROL S2 is designed to work with the TRAKTOR DJ app on iOS devices. Inthis section we will describe the

5.1.1 Browsing & Loading Tracks Follow the below tutorial to familiarize yourself with how to use the S2 to Browse through yourmusic collection in

The Mixer section of the S2, and the corresponding TRAKTOR DJ Equalizer section.In TRAKTOR DJ, Deck A is located at the top, and Deck B found below. I

TRAKTOR DJ's Filter engaged symbol.5.1.4 Adjusting Channel Gain The secondary function of the S2’s GAIN/FILTER encoders controls TRAKTOR DJ'

6.4.2 Knobs ... 99 6.4.3 Enc

5.1.5 Using the EQ’s When you move one of the S2's Eq buttons on either of Channels A or B, the correspondingeffect can be observed via TR

5.1.6 Headphone Cueing The CUE VOL knob located on the front panel of the S2 adjusts the volume levels of the head-phone output. The CUE MIX knob

12. Press both Cue buttons so that they are off.13. Turn the CUE MIX knob all the way to the right. If the channel faders are up you will beable to he

1. Pressing and spinning a Jog Wheel's top plate, you can seek through a track (to find anice bring-in point for example).2. Once

With FLUX mode engaged, try experimenting with scratching the Jog Wheels, and triggeringHotcue buttons.Using the TEMPO FadersThe S2 allows you to cont

▪ Deck Sync (& BeatGrid Mode) functions▪ Flux mode functionsThis section will take you through the functions of each button in the transpor

When a TRAKTOR DJ deck is in the Half-Sync state. The SYNC symbol of the TRAKTOR DJdeck will be lit red, and the corresponding S2 SYNC button wi

TRAKTOR DJ will save the Beat Grid location as a Hotcue point; this is why many trackswill appear with one white Hotcue button.When using TRAKTOR

Triggering a loop in TRAKTOR DJ using the Loop SIZE encoder.Storing Loops Using the S2When you find those of so perfect sections of your track's

3. Press the Loop MOVE encoder to engage TRAKTOR DJ's Loop Slicer mode.You will notice that TRAKTOR DJ now displays the selected loop size int

7.7.1 GAIN/FILTER Encoder ... 119 7.7.2 EQ Knobs ..

Triggering Hotcue button 4 in TRAKTOR DJ's Loop Slicer mode.Whilst in Loop Slicer mode, you have the opportunity to move the start point of the L

Waveform ZoomPressing SHIFT + rotating one of the S4's Loop MOVE encoders will zoom the waveform of thecorresponding TRAKTOR DJ Deck. To the righ

Triggering Hotcue button 2 whilst in Freeze Mode.The scale of the Freeze Mode section, and individual cue sections depends on the viewin

Holding SHIFT + turning the Loop MOVE encoder to adjust TRAKTOR DJ's viewing scale.When in Freeze Mode, turning the Loop MOVE encoder can be

→The effects display of TRAKTOR DJ will be revealed for the corresponding Deck. You willnotice that the top of this Effects display contains three eff

4. Using the FX 1 section (located in the top-left) of the S2, press FX button 1.The button will illuminate orange; you will also be able to hear the

7. Now turn FX Knob 1 all the way to the right.You will hear the amount of the Delay effect increasing and observe that the Effects Dis-play moves to

10. Moving the DRY/WET knob will now control all three of the selected effect variables alongTRAKTOR DJ's Y axis.Using the S2 with TRAKTOR DJUsin

6 Hardware Overview This chapter will give you an overview of the controller sections and their software equivalents.6.1 Top Panel - Main Areas This

Deck A on your S2 controller.Hardware OverviewTop Panel - Main Areas Traktor Kontrol S2 - Manual - 89

9 The S2 Audio Interface and Control Panel ...145 9.1 Settings on Mac OS X ...

Equivalent elements on the controlled Deck in TRAKTOR.On your TRAKTOR KONTROL S2 controller, each Deck provides you with:▪ a multi-function jog wheel

Many control elements on the Decks can have their function customized in order to fit yourspecific needs and habits! For more info on this, please

The Mixer on the S2 controller and in TRAKTOR.The Mixer receives on its main channels (1) the audio signals coming from the two Decks de-scribed above

As any DJ mixer, the Mixer’s purpose basically is to adjust the relative level of each channel, tocontrol the channels’ frequency content, possibly fe

On the hardware side, the TRAKTOR KONTROL S2 also provides you with two FX Units (la-beled FX1 and FX2 on your controller), which allow

6.2.1 MIC Section GAIN knob: Adjusts the gain of your microphone.MIC socket: Microphone input (jack 1/4")6.2.2 OUTPUTS Section The OUTPUTS sect

6.2.3 POWER Section The POWER section holds the sockets for the connection of your S2 to your computer and tothe power, along with the ON/OFF switch.T

The front panel of the TRAKTOR KONTROL S2.Headphones socket (PHONES) : Cue channel stereo output (jack 1/4"). Connect your headphoneshere.Headpho

6.4.1 Buttons A button (in this case, CUE/REMIX SLOTS button 2) on your S2.Buttons are spread everywhere over your TRAKTOR KONTROL S2. They can have t

6.4.2 Knobs A knob on your S2.Knobs are rotary potentiometers with limited range — this is indicated by the limited white ringaround them. By turni